Somewhere in your building, an inspection certificate is trapped in an inbox. A manual is buried in a folder on a drive that only three people know how to find. And your equipment overview lives in an Excel file that you should have updated two weeks ago.
It works. Until someone asks when that specific bed was last inspected.
And so you consider switching to a proper system. But then you immediately think of everything else: an IT project, inventorying 800 devices, resistance from colleagues who don't want to part with their paper checklists. So it remains just a thought.
We have good news about that.
Getting started with Quodoc requires no project, no prior knowledge, and no second person. Nine steps, each carried out separately, taking less than 45 minutes in total. And by the end, you will have one live asset: with its own Virtual Passport, a unique code, a QR code on the device, the right documents attached, a colleague with access, and a test ticket that has completed the full cycle from report to resolution.
You don't even need to read up on it first. Just follow along, step by step. Below is the complete roadmap.
Step 1 - Log in and explore the dashboard (approx. 2 min)
Go to app.quodoc.com and log in with your Quodoc account (or request a free demo to follow along).
That is the entire first step.
What you see next is the whole point: four key figures on a single screen. How many assets you manage, which tasks are scheduled for today, how many tickets are open, and what the AI Assistance specifically recommends. Below that is the 'Needs your attention' block, highlighting what takes priority.
Take two minutes and compare this to your current setup. To answer those same four questions today, you would have to open an Excel sheet, an inbox, and a folder of certificates. And even then, with a caveat.
Here, you don't need to click anything. You just look.
Step 2 - Build the location structure: from site to room (approx. 5 min)
Gear icon top right → Settings → Locations. That is where you build your tree structure in levels: site, building, floor, zone, room.
This is the step that will save the most time later, even if that isn't immediately obvious. Every asset automatically inherits its location from the place it is attached to. You will never have to enter it manually per device again. No 'floor' column that you have to fill in 220 times, only for it to be outdated after the first room move.
Our tip: think in the same structure as your organisation chart. That way, you can report by department later on without having to rebuild your tree.
Five minutes for the basics is more than enough. You don't need to set up every storage room across the entire premises all at once.
Step 3 - Check asset types and start from an industry template (approx. 5 min)
Asset Management → Asset Type → + Asset Type (ID).
The asset type is the engine behind the entire system: it automatically determines which fields, folder structure, and documents appear for every asset of that type. Configure it correctly once, and every subsequent device follows suit.
And you won't be starting from scratch either. Ready-made templates are built in for the care sector: care bed, wheelchair, medication fridge, fire door, etc. Each already prefilled with standard fields and notifications. If your specific type isn't listed, simply choose Blank.
If you want to work with common fault types, create them first via Library → Templates → Potential Faults, each with its own priority. Then assign them to the asset type via Edit Properties. They will appear automatically later when someone creates a ticket.
Step 4 - Create the first Virtual Passport, with unique code and QR code (approx. 10 min)
Click + Asset ID and choose your asset type. The code is suggested automatically. You fill in: cluster, location, commissioning date, serial number.
That's it. Adding a single asset instantly generates a complete Virtual Passport, complete with a unique code and a QR code.
This is the step that takes the most time, and also where you need to manage your ambitions most carefully. Our advice: start with five to ten critical or safety-related assets. Not everything. That first handful delivers tangible results fastest, which is exactly what you need to get your team on board.
The complete inventory comes later. At your own pace.
Step 5 - Link the first documents to the asset (approx. 5 min)
Via Library → Media & Documents, or upload directly from the asset itself.
Technical data sheets, user manuals, warranty certificates, inspection certificates: they are stored centrally per asset instead of being scattered across mailboxes and folders. The folders are already preset by type - manuals, warranty and purchase, inspections, maintenance - so there's nothing to design here either.
A single document per asset is enough to demonstrate the value. So pick that one certificate you reach for first during an audit, and put it where it belongs.
In addition, you can see who has access on a per-folder basis. Handy to check now, before inviting colleagues in step 7.
Step 6 - Place the QR code on the equipment (± 5 min)
First, a choice per asset: should the passport be publicly scannable? That way, staff without an account can view it too.
Then print the QR code, or use the export function. Attach it visibly on or next to the equipment. For an entire batch at once: select your assets from the list, click on Labels, choose a label template and the number of copies, and print or download as a PDF.
And then comes the moment when debates about 'a new system' usually stop. One operational team member who scans it and immediately sees the manual or the incident report form on their screen is more convincing than any explanation you could give. For the first time, the system gives them something, instead of asking for something.
Step 7 - Invite the team with the right role and location access (± 5 min)
Users → Invite User.
You assign everyone a role: technician, asset manager, or employee, for example, each with a different level of access and ticket handling. In addition, you restrict location access to what is relevant for that person. Especially on larger sites with multiple departments, this is no minor detail: staff who only see what concerns them will actually use the system.
Don't put off this step until 'everything is filled in'. The sooner colleagues follow up on tickets and tasks themselves, the faster Quodoc becomes a daily habit rather than a tool only the administrator opens.
One team member is enough to get started. You can invite the rest whenever they're ready.
Step 8 - Complete the full loop with a test ticket (± 5 min)
Create a test ticket from an asset passport, or via Tracking → Tickets.
Assign it to a technician and track the status: new, scheduled, resolved. That is the complete loop, from report to resolution, in five minutes and without anything actually being broken.
Be sure to check out both views. The list view and the kanban board display the same tickets, but suit different working styles. Choose what fits your team's daily routine, not what looks prettiest in a demo.
After this step, you won't just know that it works. You'll have seen it work for yourself, with your own equipment and your own colleague.
Step 9 - Wrap up with AI Assistance: ask in plain language (± 2 min)
Star icon in the top right. Then simply type what you want to know.
“Assets with expired inspections.” Or: “open tickets with high priority.”
What you get back isn't a generic answer on how you might look that up, but an immediately actionable list. No combining filters, no building reports, no pivot tables.
Two minutes, and the query that currently takes you half an afternoon is reduced to a single sentence.
Two rules of thumb and the mistake almost everyone makes
The rules of thumb are simple. One: mirror your location structure to your organisational chart, so your reporting works with you rather than against you later on. Two: start with five to ten critical or safety-related assets, as they give your team something tangible to engage with right away.
The classic beginner's mistake?
Wanting to catalogue everything before you even start. Every device, every document, every colleague, all in one go. That is precisely the massive IT project you were dreading—and you invented it yourself.
One asset live is a real achievement, not a half-hearted start. And from there, you build at your own pace. Repeat steps three to six for your next critical assets—this will be much faster, as your types and structure are already in place. Invite the rest of the team as soon as they're ready, each with the appropriate role.
So the question isn't whether you have time. The question is which piece of equipment you'll give a passport to first. Would you rather see it in action before logging in yourself? Request a quick online introduction, and we'll walk through these nine steps together, using your own assets.
Forty-five minutes. That's how much time you waste today searching for a single certificate.
